View UUN1E331MNL_4118502.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ALUMINUM ELECTROLYTIC CAPACITORS
UN
Chip Type, Bi-Polarized, Higher Capacitance Range
series
Chip Type ,higher capacitance in larger case sizes (12.5, 16, 18, 20) Designed for surface mounting on high density PC board. Bi-polarized series for operations over wide temperature range of - 55 ~ +105C. Applicable to automatic mounting machine using carrier tape and tray. Adapted to the RoHS directive (2002/95/EC).
UN
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan
Bi-polarized
UJ
Performance Characteristics
- 55 ~ +105C 6.3 ~ 100V 22 ~ 3300F 20% at 120Hz, 20C After 1 minutes' application of rated voltage, leakage current is not more than 0.03CV or 4 (A), whichever is greater.
Rated voltage (V) tan (MAX) 6.3 0.26 10 0.22 16 0.18 25 0.16 35 0.14 50 0.12 63 0.10 100 0.09 120Hz 20C
For capacitance of more than 1000F, add 0.02 for every increase of 1000F.
Rated voltage (V)
Stability at Low Temperature Impedance ratio Z-25C / Z+20C
ZT / Z20 (MAX.)
6.3 5 10
10 4 8
16 3 6
25 2 4
35 2 3
50 2 3
63 2 3
100 2 3
120Hz
Z-40C / Z+20C
Endurance
After 2000 hours' application of rated voltage at 105C with the polarity inverted every 250 hours, capacitors meet the characteristic requirements listed at right.
Capacitance change tan Leakage current
Within 20% of initial value 200% or less of initial specified value Initial specified value or less
Shelf Life Marking
After storing the capacitors under no load at 105C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they will meet the specified value for endurance characteristics listed above.
Black print on the case top.
Chip Type
Trade mark Voltage Lot No. Plastic platform A0.2 B0.2
Type numbering system (Example : 50V 330F)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UUN 1H 3 3 1 MNL 1 MS
nichicon
330 F
H0536
50V
Package code
B D0.5
B0.2 C0.2 E
UN
Taping Tray Size code
MS ZD
BP
Capacitance
L0.5 H0.1
A0.2
Series
Pressure relief vent
Configuration Capacitance Tolerance(20%) Rated Capacitance(330F) Rated voltage(50V) D 12.5 ~ 18 20 Code NL RL
(mm)
BD
A B C E
12.5 4.0 13.6 16.0 8.0 2.5
16. 4.5 17.1 19.5 10.5 3.75
18. 5.0 19.1 21.5 11.5 3.75
20. 5.0 21.1 23.5 13.5 3.75
The lead terminal structure : The same bent lead type (refer to p.60) that is currently used on 10mm diameter and smaller parts, is also available upon request. In this case of the bent lead type, Q Please ask for details. will be put at the 11th digit of type numbering system.
Series name Type
Dimensions
(F)
Cap. Code
H
V
6.3 0J
10 1A
16 1C
25 1E
35 1V
50 1H
63 1J
100 2A
12.5 x 13.5 12.5 x 16 100 150 180 310
22 33 47 100 220 330 470 1000 2200 3300
220 330 470 101 221 331 471 102 222 332 12.5 x 13.5 12.5 x 16 18 x 16.5 16 x 21.5 18 x 21.5 270 500 740 740 920 12.5 x 13.5 16 x 16.5 18 x 21.5 340 600 830 12.5 x 13.5 16 x 16.5 18 x 16.5 16 x 21.5 310 420 670 670 12.5 x 13.5 16 x 16.5 16 x 16.5 18 x 21.5 270 370 490 780 12.5 x 13.5 16 x 16.5 18 x 16.5 16 x 21.5 18 x 21.5 180 330 450 450 590 12.5 x 13.5 12.5 x 16 18 x 16.5 16 x 21.5 18 x 21.5 20 x 21.5 130 230 400 400 540 640 12.5 x 13.5 16 x 16.5 18 x 21.5 20 x 21.5 140 270 440 590
16 x 16.5 18 x 21.5
Case size D x L (mm)
Rated Ripple
In this case, 6 will be put at 12th digit of type numbering system, " "
Rated Ripple (mArms) at 105C 120Hz
Frequency coefficient of rated ripple current
Cap.(F) Frequency
00 ~ 470 100 ~ 470 1000 ~ 3300
50 Hz 0.75 0.80 0.85
120 Hz 1.00 1.00 1.00
300 Hz 1.35 1.23 1.10
1 kHz 1.57 1.34 1.13
10 kHz~ 2.00 1.50 1.15
Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please refer to page 3 for the minimum order quantity.
CAT.8100V

▲Up To Search▲

Price & Availability of UUN1E331MNL

	To Download UUN1E331MNL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .